123 HP DeskJet 3830 printer Offline Error Issues

Find Your Software and Drivers
Fix Printer Offline & WiFi Network Issues
Let's find My products

This can identify most products and recommend possible solutions




How does We use product data collected with this service?

Support for Offline Printer


Example: "Envy 5055"





123 HP Deskjet 3830 Printer offline issues

123 HP Deskjet 3830 Printer offline issues

How to Fix DeskJet 3830 Offline Error?

The most unpleasant aspect of the procedure is the Offline error while printing with your HP DeskJet 3830 printer offline. This problem may be caused by many causes in conjunction with the network configuration. The purpose of this website is to give information on how these issues may be corrected and that is why they are all mentioned. Find some helpful methods below to resolve the issue that you cannot connect to the internet.

First, you can use the HP Print and Scan Doctor to check network connectivity, check the setup of the default printer, reconfigure the printer, and inspect its communication link, make sure that a correct port is chosen, update the firmware or manual connection. It is possible to try some common trouble solving procedures. For more information and detailed instructions, visit 123.hp.com/dj3830.

How do i connect my hp deskjet 3830 printer to my wireless network?

Step 1- Check the network:

  • The HP DeskJet 3830 printer must be connected to a network that does not have a guest or host Network designation when you add the printer to the network.
  • Moreover, some presentation networks, especially in public locations, may have additional features, including insulation measures that prevent printers from connecting to and printing from the network.
  • Wireless Wi-Fi Direct or HP Wireless Direct are the two print choices for HP DeskJet 3830 printers without a router from your wireless PC.
  • When you have access to a wireless router that is part of a guest network, security protections may be temporarily disabled and your printer can connect with the Internet. You may then print using HP ePrint.

Step 2 - Swap from Wireless to USB or Ethernet connection:​

  • Since none of the previous methods is effective for you, try another one.
  • If you have problems with WiFi, you may have access through USB or Ethernet.
  • You have to search your printer for Windows and choose the results from the list of results.
  • Just choose Utility and then enter another printer from the menu.
  • Select utility instruction to alter the connection method was also added.
  • Choose whether you want to connect the USB cable or the network until asked.

Step 3 - Remove and reinstall Printer:​

  • The final step is to restart the computer to repair any issues.
  • After a new driver instance is created in Windows, the driver settings should be reset.
  • Type the device in Windows and then choose Devices and Printer from the search results.
  • Right-click on the name of the printer HP DeskJet 3830 and select Device Remove.
    Yes, and pause for a few of seconds.

Step 4 - Disable Simple Network Management Protocol (SNMP):​

  • Start by entering devices in the Windows search bar and from the results, choose Devices and Printers.
  • Right-click on the name of the printer and select Printer Properties from the popup context menu.
  • Choose from the drop-down menu the Ports tab.
  • After selecting the currently in use TCP/IP port, choose Configure the port from the drop-down box.
  • Once SNMP status is activated, remove the tick next to it and click OK. If required, repress the page.

Note:- In certain cases, the Windows 123 HP deskjet 3830 Printer offline problem is not addressed by using the previously mentioned troubleshooting steps. So don’t worry; call our printer support team over the phone and they will help you with the issue. Although you may contact with the following customer care team. Following the above-mentioned troubleshooting procedures, try our fourth option to check whether the issue is fixed.